Vintage B&K Model 466 CRT Tester / Rejuvenator - Dynascan Corporation
Item History & Price
| Reference Number: Avaluer:20481801 |
This unit has seen its better days, as the photos should attest. However, if you know your electronics and components, and are good with a soldering iron, then maybe you could rejuvenate this Rejuvenator.
Previous to my ownership, two of the knobs/dials - red and green - had been removed. I have no idea why, so you will have to test/verify the condition of these dials, as they are shown in one of the photos, and secure them back in working condition. If you look closely at the photo...s of the inside of the electronics, you might see where wires and components were cut in order to remove these two dials.
The knob for "Select Heater Voltage" is missing. The electrical cord and plug look fine, but the wire covering for the master plug is slightly pulled back from the plug, but the wires themselves don't look like they are exposed. One of the feet for the casing is missing, but the three that remain provide a stable enough case. And the casing itself is scuffed and scratched here and there, but nothing serious. And there is no manual included with this unit.
On the inside of the left cover is :
DYNASCAN CORP. CHICAGO, ILL. 60613 MODEL 466 105-125 VOLTS A.C. 60 HERTZ, 50 WATTS MAX.
I have not plugged this unit in to test it, because of the detached/removed dials and loose wires and components. So I would caution anyone purchasing this unit to repair it with caution and safety in mind.
Besides the vintage value of this device, as well as its remaining practical value, if you enjoy the challenge of restoring things back to their original glory, this may be your project!
This item is being offered in "as is" condition.
Please email me for any other questions or considerations. Thank you.
Previous to my ownership, two of the knobs/dials - red and green - had been removed. I have no idea why, so you will have to test/verify the condition of these dials, as they are shown in one of the photos, and secure them back in working condition. If you look closely at the photo...s of the inside of the electronics, you might see where wires and components were cut in order to remove these two dials.
The knob for "Select Heater Voltage" is missing. The electrical cord and plug look fine, but the wire covering for the master plug is slightly pulled back from the plug, but the wires themselves don't look like they are exposed. One of the feet for the casing is missing, but the three that remain provide a stable enough case. And the casing itself is scuffed and scratched here and there, but nothing serious. And there is no manual included with this unit.
On the inside of the left cover is :
DYNASCAN CORP. CHICAGO, ILL. 60613 MODEL 466 105-125 VOLTS A.C. 60 HERTZ, 50 WATTS MAX.
I have not plugged this unit in to test it, because of the detached/removed dials and loose wires and components. So I would caution anyone purchasing this unit to repair it with caution and safety in mind.
Besides the vintage value of this device, as well as its remaining practical value, if you enjoy the challenge of restoring things back to their original glory, this may be your project!
This item is being offered in "as is" condition.
Please email me for any other questions or considerations. Thank you.
